On this page, you can set the IGMP parameters. You can enable the IGMP for the WAN interface by choosing HomeGateway as the IGMP work mode. You can configure the parameters such as robustness, general query interval, general response time, special query number, special query interval and special response time only when IGMP work mode is HomeGateway and IGMP proxy is enabled. If the IGMP is disabled, you should reboot the ONT to make the IGMP parameters configured by OLT take effect.

IGMP Enable:	Disable Enable
IGMP Work Mode:	Snooping Proxy
Robustness:	*(1~10, default : 2)
General query interval:	*(30~5000s, default : 125s)
General query response time:	*(1~255, unit: 0.1s, default: 100)
Specific query number:	*(1~10, default : 2)
Specific query interval:	*(1~5000 ,unit: 0.1s, default : 10)
Specific query response time:	*(1~255 ,unit: 0.1s, default: 10)