wireless basic configure
On this page, you can set the WLAN parameters, including the WLAN switch, SSID configuration and channel selection.
Enable WLAN
  SSID Index SSID Name
SSID State
 Associated Device Number Broadcast SSID Security Configuration
SSID Configuration in Detail
SSID Name: *
Enable SSID:
Associated Device Number: *
Broadcast SSID:
WMM Enable:
Authentication Mode:
Encryption Mode:
Encryption key Length: (Using longer key lengths increases the level of security but will impact speed.)
Current Encryption Index:
Encryption key 1: * (Note: This is the wireless access password. The same password must be entered on the PC to access the Internet wirelessly. )
Encryption key 2:
Encryption key 3:
Encryption key 4:
WPA PreSharedKey: *(8-63 ASCII characters or 64 hexadecimal digits)
RADIUS Server Address: *
RADIUS Server Port: *
RADIUS Shared Key: *
WPA Group Rekey Interval: *s（600-86400）
WPS Mode:
Self-PIN Number:
Client PIN Number: *(Integer and its length must be 8)
Advance Configuration
Transmitting Power:
Regulatory Domain:
Channel:
Channel Width:
Mode:
DTIM Period: (1-255, default: 1)
Beacon Period: ms (20-1000ms, default: 100)
RTS Threshold: bytes (1-2346 bytes, default: 2346)
Frag Threshold: bytes (256-2346 bytes, default: 2346)